Dimensional Gages Since 1949

GAGE PRODUCTS


 1750 Series

DEEP INREACH GROOVE DIAMETER GAGES

Model 1765
20" inreach Approx. weight 2 lb. 10 oz.
Model 1760
16" inreach Approx. weight 2 lb. 6 oz.
Model 1755
12" inreach Approx. weight 2 lb. 2 oz.
Model 1750
8" inreach Approx. weight 1 lb. 14 oz.
Standard models available with 8", 12", 16" and 20" inreach for hard to reach groove and recess diameters
1.400" to 6.400" inside diameter range with interchangeable lower measuring tips. Tips for larger diameters available. Model 1750 -8" inreach can be modified to enter 1" entry bore diameter.
Full 5/8" retraction of upper measuring tip-will check groove recess diameters up to 5/8" larger than entry bore diameter. Greater retraction available for deeper grooves as optional extra.
Modified measuring tips readily available for applications not covered by standard range.
Two point contact standard. Three point contact available.
Supplied with AGD group 1 .0005" dial indicator with 1/8" travel - .01mm dial indicator with 2.5 mm travel optional.
Finished hardwood storage cases available for all models
  
   
HARDWOOD STORAGE CASES
  No. 1750-1 for model 1750  
  No. 1755-1 for model 1755  
  No. 1760-1 for model 1760
  No. 1765-1 for model 1765
Model 1760 illustrated in No. 1760-1 hardwood storage case.
  
   
Model 
Number
Inreach Diameter
 Range
Approximate 
Weight
1750 8"  *1.400"-6.400"  1 lb. 14 oz.
1755 12"  *1.400"-6.400"  2 lb.   2 oz.
1760 16"  *1.400"-6.400"  2 lb.   6 oz.
1765 20"  *1.400"-6.400"  2 lb. 10 oz.

          *See lower measuring tip selection chart

  
   

  INTERCHANGEABLE LOWER MEASURING TIP  
SELECTION CHART

Tip No. "A" Diameter Range
  MIN.             MAX.
1775-1 1.400"     -     1.900"
1775-2 1.900"     -     2.400"
1775-3 2.400"     -     2.900"
1775-4 2.900"     -     3.400"
1775-5 3.400"     -     3.900"
1775-6 3.900"     -     4.400"
1775-7 4.400"     -     4.900"
1775-8 4.900"     -     5.400"
1775-9 5.400"     -     5.900"
1775-10 5.900"     -     6.400"

If groove diameter & entry bore diameter are not covered
by same tip number, please advise both dimensions 
and we will provide special tip at no extra charge.

  
   

INTERCHANGEABLE LOWER MEASURING TIP SELECTION CHART

Two point contact standard
Three point contact available
Tips are .100" thick
  • Can be supplied thinner for narrower grooves
  • Three point contact available.
  • Tips are .100" thick
1775 Tip Set - Includes Lower Tips 1-10 and 1775-0 + .25 Longer Upper Tip
1775-1 1775-2 1775-3 1775-4 1775-5 1775-6 1775-7 1775-8 1775-9 1775-10
  
   

SPECIFICATIONS OF GROOVE DIAMETER GAGES

  
   

ORDERING INFORMATION

Gage supplied with 1775-0 upper measuring tip and one (1) only lower measuring tip selected from ten (10) stock sizes listed (1775-1 through 1775-10). For special applications supply entry bore diameter and groove diameter and we will supply special lower tip at no extra cost.

   
318 Agostino Road, San Gabriel, CA 91776-2502
Phone: 626-287-2911 or 800-645-8719
Fax: 626-286-8693
Email: info@muellergages.com
 
 
Web site by websites.ac